TMIC Top Mount Intercooler SUBARU WRX 08-14 LEGACY FORESTER Bolt On
Bar & Plate design
max horsepower capacity: 430 hp
core length: 11"
core height: 10.75"
core thickness: 4"
overall end to end length : 11" x 17"
will fit stock stock bov or any bov with stock flange
2008 - 2014 SUBARU WRX ( 2.5 TURBO )
2005 - 2009 SUBARU LEGACY ( 2.5 TURBO )
2009 - 2013 SUBARU FORESTER XT ( 2.5 TURBO )
We also make following massive intercooler:
This massive front mount intercooler is all show and all go.
100% Lightweight aluminum, No Epoxy Used In Core
Show quality, mirror polished finish
Bar and Plate, Internal Fin Design
Fin pitch is 15 fins/inch - 8 external and 7 internal
Recommended for up to 1000 CFM / 800 HP
Pressure Drop: Less than 1 PSI
Inlet: 3.0" Outlet: 3.0"
Core Size: 24"x11.75"x4" (Endtanks add 7" to length)
When the charged air enters the end tank, it travels through the
tubes of an Intercooler, in which the heat is transferred via fins,
where cooler ambient air passes over the tubes. This mechanism
further removes heat from air before exiting the opposite end tank
and routing to the engine.
Bar and Plate Intercooler functions identically to the Tube and Fin
Core, with the exception that, charged air travels through its
rectangular shaped passages, which have more surface area; thus,
improves cooling effect and power of the charged air. The advantage
of this type of intercoolers is that, since the bar and plate core
affords up to 35% larger surface area for cooling, a physically
smaller intercooler can be used and still retains the cooling
efficiency of a larger tube and fin design. This is important for a
builder who has a vehicle with a compact opening in the front of it
or when there are immovable obstructions present.
1x aluminum intercooler