Engine Oil Cooler Kit Nissan SR20DET Silvia S13 S14 S15 180SX 200SX
240SX 16 Row
Nissan Silvia S13 S14 180SX 200SX 240SX SR20DET TURBO ( ONLY FOR
NISSAN SR20DET ENGINE )
NISSAN Silvia S13 S14 180SX 200SX 240SX SR20DET TURBO ( ONLY FOR
NISSAN SR20DET ENGINE )
Oil cooler size :
overall size: 13" x 6.06" x 2.00"
core size: 11.22" x 4.88" x 2.00"
Inlet / Outlet Size: AN-10
Oil line size :
AN-10 Nylon and steel Oil line
3 Oil Lines (Lengths: 1.2M, 1.4M, 1.6M )
Oil Cooler ,Oil Filter Sandwich Adapter, 3 Oil Lines (Lengths:
1.2M, 1.4M, 1.6M ), 1 Hose Separator
The SR20DET engine's factory oil block tends to fail due to the
weak oil filter sensor screw which often breaks.
This block adapter is CNC machined from billet 6061 aluminum and
features ports for oil temperature and oil pressure sensors.
This part eliminates the factory oil filter housing so that no
block adapter is needed for an oil cooler setup.
We recommend a use of an oil cooler all vehicles. This oil cooler
takes stress off the motor's cooling system by allowing more heat
to be exchanged. When you turbocharge your car, the turbo creates a
lot of heat which will eventually boil the oil and lead to engine
failure. An oil cooler is a cheap and efficient way to ensure that
the motor oil will stay cool. The oil cooler kit allows you to hold
more oil in the system which increases the cooling capacity.
Most tuners drive their cars hard; thus, have to change the oil
often to avoid any harmful oil contaminants from damaging the
engine internals. Oil filter relocation kits allow quicker oil
changes since it relocates oil filters to a location that is easier
to reach. There will be no more laying on your back, trying to
reach up behind the block to remove the oil filter. The oil filter
relocation kit will also allow tuners to use a larger oil filter
than the stock, increasing the oil capacity of the engine, thereby
increasing the oil protection of the engine internals.
We can also make oil cooler kit for following vehicles;
- Setrab-Core Oil Cooler
- Interspaced Oil-Ways
- Can Be Used On Engines, Transmissions
- Plate & Fin Core Design
- Works Well With Turbo Charged / High Performance Engines
- Please Take Correct Measurements Of Item To Confirm It Will Fit In
The Location Provided For Your Vehicle
- No Installation Guides Are Included,
Please make sure you input the correct shipping address during
checkout. We cannot be held responsible for incorrect or
undeliverable addresses. Buyer pays reshipment charges.
Transactions will be held if the shipping amounts are not paid in
UPS,TNT,Fedex does not ship to PO Box addresses so if an alternate
address is not provided, your order would either be held or shipped
via other means such as USPS (Additional fee may be applied).