5 Lug HubCentric Wheel Spacers Cherokee Wrangler 5x5 1/2"x20 Studs
These spacers are made to adapt 5 x 5 vehicle bolt patterns and 5 x
5 wheel bolt pattern. Please make sure that these are correct ones
for your vehicle. Lug centric wheel spacers are also available in
our company if you are interested.
|Material:||T6061 Billet Aluminum|
|Surface Finish:||High Quality Aerospace Aluminum Silver|
|Thickness:||1.5 inches / 38 mm|
|Vehicle Bolt Pattern:||5 x 5 / 5 x 127|
|Wheel Bolt Pattern:||5 x 5 / 5 x 127|
|Thread Size:||1/2" x 20|
|Center Bore:||71.5 mm|
Q1. Can I run different size wheel spacers in the front and rear?
Yes. Different size wheel spacers in the front and rear are very
common. Often times the front and rear havedifferent
requirements for optimal fitment.
Q2. Will Wheel Spacers stop my tires from rubbing the fender lip?
No. If your tire is rubbing your vehicle's fender lip it is
possible that you have a tire or wheel fitment issue.
Q3. Is wheel alignment necessary with Wheel Spacers?
Wheel alignment is not necessary after installing Wheel Spacers.
Q4. An important technical about this kind of spacer installation
as the picture shows.
WARNING for 15mm/20mm spacer: Because 15mm/20mm wheel spacer is
smaller than the length of the standard
studs. For proper installation, it is REQUIRED that the back of
your wheels have small cavities in the mounting pad
for our 15mm/20mm spacers. These cavities are needed so that the
lug nuts and wheel studs can sit in this pocket.
We can produce whatever type of wheel spacer you like. For any
size, for any Car/ATV/UTV. We have our own company, design team and
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and
creating the value for our customers.
2. insistence on designing and producing by ourselves in order to
make sure the our product's stability of the quality and
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest
standard among our rivals in order to make sure that our product
will be in the perfect condition in our customer's hand (not only
the best quality but also there's no scratch on our products which
has been sent to our customers).
Made from High-Strength Aircraft-Aluminum Alloy
- Precision Engineered Hub-Centric for Perfect Fit and Wheel Balance
- Strength-Tested for All Applications
- Extreme corrosion Protection Through DIN 50021 Approved Coating
- TUV, QS9000 and ISO9001 Quality Approved
- Reduced Weight Compared to Steel Wheel Spacer