4.50"x9.00"x10.125" Air to Water Intercooler Core Custom
We can also make following air to water intercooler.
This impressive Liquid/Air intercooler is better than any FMIC.
100% Lightweight aluminum, No Epoxy Used In Core
Fin pitch is 21 fins/inch - 12.5 air side and 8.5 water side.
Recommended for up to 700 CFM / 600 HP
Pressure Drop: Less than 0.1 PSI. This is not a typo! Liquid/Air
Intercoolers have incredibly low pressure drop.
Air Inlet/Outlet: 3.0"
Water Inlet/Outlet: 1/2" NPT
Maximum water/air pressure: 70 PSI
Core Size: 10.5"x6"x4.5" (Endtanks add to length)
The inlet and outlet on this intercooler are located at a 90 degree
angle for cramped installations.
Note: The water inlet and outlet on most water/air intercoolers are
BPT threads. BPT fittings are difficult to find in the United
States, so ours all come with NPT threads.
Some Water to Air Intercoolers that you can buy online do not
contain true water to air cores. A true water to air core has water
passages that are much smaller than the air passages. This is part
of what allows the water to air intercooler to be so small and have
such low pressure drop. Some water to air intercoolers that you buy
online use an air to air core design where the air passages for
ambient air and intake air are the same size, with an enormous loss
of efficiency. Buy from us to make sure that you get a genuine
water to air intercooler core!
Air/liquid intercoolers operate by pumping cooled water through the
cores either from a front-mounted radiator or heat exchanger, or
chilled water produced by circulating the liquid through a
container filled with ice, as used in drag racing. Depending on
engine size and heat load, we recommend a container that will hold
a minimum of 12 pounds of ice.
If a front radiator is used, this should be as large as possible
since the temperature of the liquid entering If a front radiator is
used, this should be as large as possible since the temperature of
the liquid entering the intercooler determines the cooling
effectiveness. We recommend a radiator as used on small automobiles
with a minimum surface area of at least 260 sq. inches. Radiator
technology is preferable rather than oil cooler technology, as
these are specifically designed to cool water/glycol.
When these intercoolers are used with chilled water, it is possible
in some cases, to get charge temperatures below ambient
temperature. Therefore remarkable increases in air density and
power are possible.
There are diverse opinions about the advantage of air/liquid
intercoolers versus air/air intercoolers in drag racing
applications. Some say there is no advantage over air/air and they
also say if there is an advantage it is offset by the added weight.
The real facts are that other than a small additional weight
factor, a proper application of an air/liquid intercooler will
increase power more than enough to offset any additional weight,
and will always yield superior performance over an air/air unit.
Furthermore, the additional weight is sometimes needed for ballast,
eliminating this disadvantage.
Built to match your exact requirements
High quality you can rely on
Expertly made from premium materials
Vacuum Brazed Cores
These high quality, high performance intercooler cores are pressure
tested prior to shipping.Utilizes a bar and plate design for the
highest efficiency and performance.
Our Intercooler Cores are also available as a complete assembly
with TIG welded cast aluminum end tanks in several configurations.
1.Shipping by sea or air to US.UK.France.RU.AU.CA.Noway.Germany.15
working days for sea shipment.
3-4 days for air shipment.
2.If you need fast shipping same as UPS DHL FEDEX EMS.Please
3.We only ship to the confirmed address provided by PayPal or
email. please make sure your address in PayPal after you paid us.
4.Parts will be shipped out within 1 week if they are in stock.
5.Tracking number can be checked on local post website.
Should you have any questions both before buying or after you have
purchased the item, please do not hesitate to contact our customer
service support team.
Our office hours are Monday to Friday, we are off during the
weekends and all major holidays and you will be guaranteed that
your questions will be replied promptly.
Normally we can reply your email within 24hr, If you have a problem
about your shipment, please email us to solve it.
If you have a problem about your shipment, please email us to solve
In order to maintain our superb customer service we need your help.